Connecting your MyZone HR sensor to FITIV Pulse ensures accurate heart rate monitoring during workouts. This guide provides simple, step-by-step instructions to pair your MyZone device with the MyZone app and then connect it to FITIV Pulse. Follow these steps to optimize your workout tracking seamlessly.
Pair and Connect Your MyZone HR Sensor to the MyZone App
To ensure a proper connection between your phone and MyZone device, follow these steps:
-
Enable Bluetooth:
- Make sure Bluetooth is turned on in your iOS settings.
- Ensure Bluetooth permissions are enabled for the MyZone app. (Settings > MyZone® > Bluetooth Toggle must me on)
-
Activate the MyZone Device:
- Open the MyZone app.
- Your MyZone device should show on your My Devices list when it is activated during use.
Alert Tip: Do not pair your MyZone device directly to your phone through the Bluetooth settings. Your device will appear in the My Devices list in the MyZone app when activated, but should not be paired otherwise.
Related content: To learn more about how to create your MyZone account, and on How to setup the MyZone app, please refer to the MyZone Knowledge Base resources: https://www.myzone.digital/en/knowledge/how-do-i-sign-up-for-myzone .
Verify MyZone Device Activation
-
Open the MyZone App:
- Check if your MyZone device is turned on.
- Under the "Mytile" tab, you should see a live stream of your active heart rate.
Connect MyZone Device to FITIV Pulse
- Open FITIV Pulse and Go to the Profile tab and tap the gear icon in the top-right corner.
-
Add New Sensor:
- Go to "Bluetooth Sensors."
- Tap on "Add New Sensor."
- Your MyZone sensor should appear in the list.
- Tap on "ADD."
-
Return to Sensor List:
- Tap on "< Back" to return to your Bluetooth sensor list.
- Your MyZone sensor should now be paired with FITIV Pulse.
Pro Tip: After the initial pairing, FITIV Pulse will automatically recognize the MyZone monitor each time. However, you need to open the MyZone app before starting a workout on FITIV Pulse to ensure connectivity.
Frequently Asked Questions (FAQs)
Q: Can I use my MyZone HR sensor with FITIV Pulse?
Solution: Yes, FITIV Pulse supports connection to your MyZone sensor.
Supported MyZone Devices
Here is the list of all MyZone devices FITIV supports:
- MZ-Open Smart Watch
- MZ-Switch Heart Rate Monitor
- MZ-3 Heart Rate Monitor
- MZ-1 Heart Rate Monitor
- The FITIV Support Team

